page 1 of 3 dc/dc converters thd 15win series, 15 watt features highest power density in dip 24 package shielded metal case with isolated baseplate very high effciency up to 90% ultra wide 4:1 input ranges no minimum load required input flter meets en 55022 class a without external components i/o isolation voltage 1500 vdc operating temp. range : C40c to +85c remote on/off control industry standard pinout 3-year product warranty the thd-15win series models provide 15 watt output power out of a very compact shielded metal case that occupies only 1 inch2 of board space. the converters work with a high effciency over the full load range and draw a very low input current at no load conditions. all models have a wide 4:1 input voltage range and a precisely regulated output voltage. typical applications for these converters are mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and ev - erywhere where space on pcb is critical. order code input voltage range output voltage output current max. effciency typ. thd 15-2410win 3.3 vdc 4000 ma 88 % thd 15-2411win 5.1 vdc 3000 ma 90 % thd 15-2412win 9 C 36 vdc 12 vdc 1250 ma 90 % thd 15-2413win 15 vdc 1000 ma 90 % thd 15-2421win 5 vdc 1500 ma 86 % thd 15-2422win 12 vdc 625 ma 89 % thd 15-2423win 15 vdc 500 ma 90 % thd 15-4810win 3.3 vdc 4000 ma 89 % thd 15-4811win 5.1 vdc 3000 ma 89 % thd 15-4812win 18 C 75 vdc 12 vdc 1250 ma 90 % thd 15-4813win 15 vdc 1000 ma 90 % thd 15-4821win 5 vdc 1500 ma 86 % thd 15-4822win 12 vdc 625 ma 89 % thd 15-4823win 15 vdc 500 ma 90 % models cb scheme ul 60 95 0- 1u l 60 95 0- 1 http://www.tracopower.com
page 2 of 3 dc/dc converters thd 15win series 15 watt input specifications input current at no load (nominal input voltage) 24 vin models: 6 ma typ. 48 vin models: 4 ma typ. input current at full load (nominal input voltage) 24 vin models: 740 ma typ. 48 vin models: 370 ma typ. start-up voltage / under voltage shut down 24 vin models: 9 vdc / 8 vdc 48 vin models: 18 vdc / 16 vdc surge voltage (1 sec. max.) 24 vin models: 50 v max. 48 vin models: 100 v max. conducted noise (input) en 55022 class a, fcc part 15, level a (without external components) en 55022 class b, with external filter see application note esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3 10 v/m, perf. criteria a fast transient / surge en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv perf. criteria a with external input capacitor e.g. nippon chemi-con ky 220 f, 100 v, esr 48 mohm conducted immunity en 61000-4-6, 10 vrms, perf. criteria a reflected ripple current 20 map-p typ. output specifications voltage set accuracy 1 % max regulation C input variation single output models: 0.2 % max. (vin min to vin max.) dual output models: 0.5 % max. (vin min to vin max.) C load variation 0 C 100% single output models: 0.5 % max. dual output models: 1.0 % max. balanced load C load variation 10 C 90% single output models: 0.3 % max. dual output models: 0.8 % max. balanced load C load cross regulation 25/100% (asymmetrical) 5.0 % max. (dual output models) minimum load no minimum load temperature coefficient 0.02 %/k ripple and noise (20 mhz bandwidth) 60 mvp-p typ. (with 1 f/25 v) output current limitation at 150 % of iout max. hiccup short circuit protection continous, automatic recovery over voltage protection (single output models only) 3.3 vdc models: 3.9 vdc 5.1 vdc models: 6.2 vdc 12 vdc models: 15 vd c 15 vdc models: 18 vdc start up time (nominal vin and constant resistive load) 60 ms typ. (for power on and remote on) transient response setting time (25% load step change) 250 s typ. capacitive load 3.3 vdc models: 4700 f max. 5.1 vdc models: 3300 f max. 12 vdc models: 600 f max. 15 vdc models: 400 f max. 5 vdc models: 1500 f max. 12 vdc models: 288 f max. 15 vdc models: 200 f max. http://www.tracopower.com all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated.
page 3 of 3 sp ec i?cati ons can be changed wi thout noti ce! make sure you are using the latest documentation, downloadable at www.tracopower. com www .tracopower. com dc/dc converters thd 15win series 15 watt general specifications temperature ranges C operating C40c to +85c (with derating) C case temperature +105c max. C storage C55c to +125c power derating 5 vdc models: 2.5 %/k above 60c other models: 3.3 %/k above 70c thermal inpedance C natural convection 20k/w humidi ty (non condensing) 5 % to 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) >1600000 h isolation voltage (60sec.) C input/output 1500 vdc isolation capacitance C input/output 2000 pf typ. isolation resistance C input/output (500 vdc) >1000 mohm remote on/off C on: 3.0 ... 12 vdc or open circuit C off: 0 ... 1.2 vdc or short circuit pin 1 and pin 2 C off idle current: 2.5 ma switching frequency 330 khz typ. (pulse width modulation pwm) thermal shock, mechanical shock & vibration en 61373, mil-std-810f C test conditions www.tracopower.com/products/mil810.pdf safety standards ul/cul 60950-1, iec/en 60950-1 C certification documents www.tracopower.com/overview/thd15win environmental compliance C reach www.tracopower.com/overview/thd15win C rohs rohs directive 2011/65/eu outline dimensions dimensions in [mm], () = inch pin diameter ? 0.5 (0.02) pin pitch tolerances: 0.35 (0.014) tolerances: 0.5 (0.02) pin single dual 1 remote on/off remote on/off 2 Cvin (gnd) Cvin (gnd) 3 Cvin (gnd) Cvin (gnd) 9 nc common 11 nc. Cvout 14 +vout +vout 16 Cvout common 22 +vin (vcc) +vin (vcc) 23 +vin (vcc) +vin (vcc) pin-out 2.0 (0.08) 25.4 (1.0) 20.3 (0.80) 2.54 (0.10) 31.8 (1.25) 10.2 15.24 (0.60) 9 11 22 23 2 3 16 14 bottom view 15.24 (0.60) 5.08 2.5 3.8 insulated baseplate (0.10) (0.15) (0.20) (0.40) 1 physical specifications casing material nickel coated copper baseplate non conductive fr4 potting material silicon (ul 94v-0 rated) weight 14.4 g ( 0.51oz) soldering temperature max. 265c / 10sec. rev. january 28. 2016
|